Quick answer
The classic way to make a ball shape with paper is the origami waterbomb balloon. It’s a traditional model folded from one square, with no glue or scissors. You fold it flat, then blow into a small hole to puff it up into a rounded, cube-like ball. It takes about five minutes.
For a rounder ball, you can join many small folded units into a modular ball (kusudama), weave paper strips into a sphere, or fold the collapsible magic ball. These are covered further down.
How to fold a paper balloon (waterbomb ball)
What you need
- One square of paper. A 15 cm (6 in) origami square is ideal for a first try. Printer paper cut square works too, but it’s a little harder to inflate.
- Thin, crisp paper inflates more easily than thick paper.
Steps
- Crease the diagonals. Place the square colored side down. Fold it in half diagonally both ways, unfolding after each.
- Crease the midlines. Turn the paper over. Fold it in half from top to bottom and from left to right, unfolding after each. Turn it back over.
- Collapse into a waterbomb base. Bring the left and right sides inward toward the center along the creases while you bring the top edge down. Flatten everything into a triangle with two layers on each side. This is the waterbomb base.
- Fold the corners to the top. With the point of the triangle up, fold the bottom left and right corners of the front layer up to meet the top point. You now have a small diamond. Turn the model over and repeat on the back.
- Fold the side points to the center. Fold the left and right corners of the front layer in so they meet at the vertical center line. Turn over and repeat.
- Fold down the top flaps. At the top you’ll see two small loose triangles on the front. Fold each one down so it lies over the triangle you just made beside it.
- Tuck them into the pockets. Each of the side triangles from step 5 has a small pocket along its edge. Tuck the flaps from step 6 into these pockets. Crease well, then turn over and repeat steps 6 and 7 on the back.
- Inflate. Find the small hole at the bottom point of the model. Gently pull the sides apart a little to loosen the layers, then blow firmly into the hole. The model puffs up into a ball.
- Shape it. Gently press the edges to make it more even, and blow again if it needs more air.
Troubleshooting
- It won’t inflate. Make sure the hole at the bottom is open, then loosen the flaps slightly before blowing. Thicker paper may need a few firm breaths, or gentle shaping with your fingers from the inside of the hole.
- The paper tears at the tucks. The flaps are being forced into the pockets. Fold them a little shorter, or use thinner paper.
- It’s lopsided. The flaps from step 5 probably didn’t meet exactly at the center line. Refold more accurately next time.
- It deflates. Paper balloons aren’t airtight, so they keep their shape mostly from the folded structure. Re-inflate as needed.
Other ways to make a paper ball
Modular origami ball (kusudama)
A modular ball is made from many identical folded units that lock together without glue, or sometimes with a little glue. Popular options include:
- Sonobe units. Twelve units make a small spiky ball, and 30 make a larger, rounder one. Sonobe units are simple to fold, so they’re a good first modular project.
- Flower and star kusudama. These are more decorative designs. Some are stitched or glued together from folded flowers.
Modular balls take longer, often 30 minutes to a few hours, but they’re sturdy and look striking hung as decorations.
Woven paper strip ball
You can also make a ball from paper strips, though this is more of a paper craft than origami:
- Cut several strips of the same length and width.
- Cross them at their centers like the spokes of a wheel and fix the center with glue or a brad fastener.
- Bring the ends of each strip up and over, and join them at the top to form a round cage.
Weaving extra strips around the middle makes it stronger. These balls are light and good for decorations.
Origami magic ball
The magic ball is a sphere folded from one heavily creased rectangle. Press it and it collapses, then springs back. It’s a longer project, often a few hours the first time, but it’s very satisfying to fiddle with. See our step-by-step magic ball guide.
Which paper ball should you make?
| Ball | Time | Difficulty | Best for |
|---|---|---|---|
| Waterbomb balloon | About 5 minutes | Easy | Quick play, kids, classrooms |
| Sonobe modular ball | 30–60 minutes | Easy to intermediate | Sturdy decorations, group projects |
| Woven strip ball | 15–30 minutes | Easy (uses cutting and glue) | Light decorations |
| Magic ball | Often a few hours | Intermediate | Fidgeting |
Times are rough guides for a first attempt.
Fun things to do with a paper ball
- Paper balloon volleyball. Bat a waterbomb balloon back and forth over a line of books.
- Turn it into a character. A pink waterbomb balloon makes an easy Jigglypuff, and a red-and-white one makes a Poké Ball. See origami Pokemon step by step.
- Hang a kusudama. Thread string through the top of a modular ball and hang it as a decoration.
- Use it as a fidget. A magic ball or a soft waterbomb balloon is nice to turn in your hands. See how to make an easy origami fidget for more ideas.
The waterbomb balloon got its name because it can be filled with water. If you try that, do it outside, as it soaks through and leaks quickly. For more playable folds, visit our origami toys guide.