Math and Science

Origami Platonic Solids: Cubes to Dodecahedron Dice

How to fold all five Platonic solids in modular origami, with Sonobe cube instructions and a plan for a numbered dodecahedron 12-sided die.

On this page
  1. The five Platonic solids at a glance
  2. Choosing a folding approach
  3. Start here: the six-unit Sonobe cube
  4. Tetrahedron, octahedron and icosahedron
  5. Folding a dodecahedron 12-sided die
  6. Paper and sizing tips
  7. The math you can check on your model

The five Platonic solids at a glance

A Platonic solid is a convex polyhedron whose faces are all the same regular polygon, with the same number of faces meeting at every corner. There are exactly five, and conveniently they are also the five classic dice shapes used in tabletop games.

Solid Faces Face shape Edges Vertices Faces per vertex Die
Tetrahedron 4 Triangle 6 4 3 d4
Cube (hexahedron) 6 Square 12 8 3 d6
Octahedron 8 Triangle 12 6 4 d8
Dodecahedron 12 Pentagon 30 20 3 d12
Icosahedron 20 Triangle 30 12 5 d20

These counts matter when folding, because in modular origami the number of units usually equals the number of faces, edges or vertices.

Choosing a folding approach

You can fold Platonic solids from a single sheet, but most people use modular origami: many identical units that lock together without glue. Modular designs are easier to fold accurately, and they let you make large, sturdy models. There are three common approaches.

Face units

Each unit becomes one face, with tabs and pockets that join it to its neighbors. A cube takes 6 units and a dodecahedron 12 pentagonal units. Face units give clean, flat faces, which is what you want for dice. The catch for the dodecahedron is that a pentagon does not divide neatly out of a square, so pentagon units involve more careful folding.

Edge units

Each unit forms one edge, usually as a long strip with angled ends that link into the units at each corner. A tetrahedron takes 6 units, the cube and octahedron 12 each, and the dodecahedron and icosahedron 30 each. Edge-unit models often have open, skeletal faces, which look striking but don’t roll well as dice.

Pyramid-faced (Sonobe) versions

The Sonobe unit, credited to Mitsunobu Sonobe, is one of the most widely taught origami modules, and it is the best place to start. Six Sonobe units make a flat-faced cube. Larger counts produce solids where each triangular face of a Platonic solid is topped with a small pyramid: 12 units give an octahedron with a pyramid on each face and 30 units an icosahedron with a pyramid on each face. These are spiky, decorative versions rather than true Platonic solids, but they teach the same assembly logic.

Start here: the six-unit Sonobe cube

You need 6 squares of the same size. 7.5 cm (3 inch) or 15 cm (6 inch) origami paper both work. Use three colors, two squares each, so opposite faces match.

Folding one Sonobe unit

Diagrams vary slightly between books and websites, but the finished unit should always be a parallelogram with a square in the middle, a triangular tab at each end, and a pocket under each folded edge.

  1. Start colored side down. Fold the square in half from left to right and unfold to make a vertical center crease.
  2. Cupboard fold. Fold the left and right edges to the center crease. You now have a tall rectangle with two flaps meeting in the middle.
  3. Fold the first diagonal. Fold the bottom-right corner up until it touches the left edge. The crease runs at 45° from the bottom-left corner. Unfold.
  4. Fold the second diagonal. Fold the top-left corner down until it touches the right edge. The crease runs at 45° from the top-right corner. Unfold.
  5. Refold with the triangles tucked in. Lift the left flap, refold the bottom diagonal from step 3, and lay the flap back down over it. Do the same at the top with the right flap. The paper now forms a long parallelogram with pockets along the flap edges.
  6. Turn the unit over. Fold the bottom point up to the opposite obtuse corner, and fold the top point down to the other obtuse corner. This leaves a square in the middle with a triangle folded over at each end. Crease sharply.
  7. Unfold the two triangles from step 6 so they stick out as tabs. The square is one face of the cube, and the tabs plug into neighboring units.

Repeat for all six units, and make every unit the same way (don’t mirror any). Units folded as mirror images won’t lock together.

Assembling the cube

  1. Take two units of different colors. Slide a tab of one into a pocket of the other so their square faces sit at right angles.
  2. Add a third unit to form one corner of the cube, where three faces meet. Each face’s square should have tabs from its neighbors tucked into its pockets.
  3. Keep adding units, working around the cube. Place matching colors on opposite faces.
  4. The last unit is the hardest. Gently open the remaining pockets and ease the final tabs in. Don’t force them, or the paper may crease in the wrong place.

The finished cube holds together by friction and the tension in the folds. If it feels loose, your creases from step 6 probably aren’t sharp enough.

Tetrahedron, octahedron and icosahedron

The three triangle-faced solids are where unit counts climb quickly. Some practical notes:

  • Tetrahedron (4 faces). The simplest solid, but it’s awkward in modular origami because three faces meet at each corner at a sharp angle. Single-sheet designs and 6-unit edge designs are common.
  • Octahedron (8 faces). Four faces meet at each corner, so the angles are gentler. Triangle face units and 12-unit edge designs both work well.
  • Icosahedron (20 faces). Five faces meet at each corner, which makes it rounder and very stable. A flat-faced icosahedron needs 20 face units or 30 edge units. The 30-unit pyramid-faced Sonobe version is a popular stepping stone.

To fold equilateral triangles or 60° angles from a square, crease a vertical center line, then fold one bottom corner up so it lands on that line with the fold running through the other bottom corner. Where the corner lands is the top of an equilateral triangle sitting on the bottom edge. Many triangle units are built from this reference point.

Folding a dodecahedron 12-sided die

A dodecahedron makes a handsome d12, and it’s the solid most people want once they’ve built a cube. It’s also the hardest of the five to fold neatly, because it has pentagonal faces.

Planning the units and colors

There are two practical routes:

  • 12 pentagon face units. Best for a die, since every face is flat and solid enough to write on. Many unit designs start by folding a regular or near-regular pentagon from a square. Accuracy matters here: small errors in the pentagon add up across 12 faces.
  • 30 edge units. These are often simpler to fold individually and give a sturdy frame, but the faces may be open or patterned, which makes numbering harder.

If you want no two neighboring faces to share a color, you need at least four colors, three faces of each. Three colors aren’t enough, because every face of a dodecahedron touches five others in a ring. Sketch your color plan on a printed dodecahedron net before you start. If you don’t mind matching neighbors, six colors in opposite pairs is another tidy option.

Assembly tips

  • Fold all units before assembling so they come out consistent.
  • Build a “cup” first. Join five units around one central face. Then build a second cup the same way. Each cup is half the die, so finish by joining the two halves.
  • Use firmer paper. Thin kami can sag across a pentagon face. Slightly heavier paper keeps faces flatter and helps the die hold its shape.
  • A dot of glue is optional. Purists avoid it, but if the die is going to be rolled across a table, a tiny amount of glue inside each joint makes it last much longer.

Numbering a d12

Standard 12-sided dice are numbered so that opposite faces add up to 13: 1 opposite 12, 2 opposite 11, 3 opposite 10, 4 opposite 9, 5 opposite 8 and 6 opposite 7. Mark the numbers lightly in pencil first, check every opposite pair, then ink them. Underline the 6 and 9 so they can’t be confused.

The same “opposite faces” convention applies to the other dice: opposite faces of a d6 add to 7, a d8 to 9 and a d20 to 21. A d4 has no opposite faces; you read the number at the top point or along the bottom edges, depending on the style.

Will a paper die roll fairly?

Probably fair enough for casual games, but don’t count on it for anything that matters. A die is only fair if it is symmetrical in shape and evenly balanced, and handmade paper dice tend to have slightly uneven faces, extra layers in some joints, and soft spots that flatten with use. Paper is also very light, so it tends to slide rather than tumble. Roll it in a box or tray, check that the faces still sit flat after a few games, and refold any unit that has lost its shape.

Paper and sizing tips

  • Size. 7.5 cm squares make compact dice; 15 cm squares make models that are easier to assemble but large for rolling.
  • Weight. Standard origami paper is fine for a Sonobe cube. For dice and 30-unit models, slightly thicker paper holds up better.
  • Consistency. Cut or buy all squares from one pack. Small size differences between units cause gaps.
  • Crease sharply. Run a fingernail or bone folder along each fold. Modular models are held together by crisp creases.

The math you can check on your model

Once you’ve built a few solids, count their vertices (V), edges (E) and faces (F). For every Platonic solid, V − E + F = 2, which is Euler’s polyhedron formula. Notice too that the cube and octahedron swap face and vertex counts (6 and 8), as do the dodecahedron and icosahedron (12 and 20). They are dual pairs, and the tetrahedron is its own dual.

These are good classroom activities, and they connect to the wider ideas in our guide to mathematics through origami, which includes a lesson plan built around exactly this counting exercise.

The complete guide to math and science

Mathematics Through Origami: Geometry You Can Fold
Read the guide

Keep exploring

Guides from other topics

All topics →