Many origami models start from the same few shapes, called bases. Learn a handful of them and you will recognise the opening steps of dozens of models, from simple boats to the crane. This guide covers the four bases beginners meet most often, with written steps for each.
The steps use valley folds, mountain folds and a few collapses. If those terms are new, start with our guide to basic origami folds.
What an origami base is
A base is a standard folded shape that serves as the starting point for many different models. Instead of describing every opening fold, diagrams often simply say “start with a bird base” or “start with a square base”.
Bases are especially common in traditional origami. Modern designers often create their own starting structures, but the classic bases are still the foundation most folders learn first.
Kite base
The kite base is the simplest base and a good first one to learn.
- Lay the square as a diamond, with a corner pointing toward you.
- Fold it in half from left corner to right corner, crease, and unfold. This leaves a vertical diagonal crease.
- Fold the lower left edge to lie along the centre crease.
- Fold the lower right edge to the centre crease in the same way.
The result looks like a kite. It is used for simple models such as some swans, fish and dog or cat faces, and kite folds also appear inside other bases.
Square base (preliminary base)
The square base, also called the preliminary base, collapses a square into a smaller square with four flaps. It is the starting point for the bird base, the frog base and many flowers and boxes.
- Start with the coloured side up. Fold in half diagonally both ways, unfolding after each fold.
- Turn the paper over. Fold in half edge to edge both ways, unfolding after each.
- Turn the paper back to the coloured side and hold it as a diamond.
- Bring the left, right and top corners down to the bottom corner. The paper will collapse along the creases you made.
- Flatten it into a small square, with the open end (the four loose corners) pointing toward you.
The closed point of the square base is the centre of the original sheet. If the paper resists, re-crease the folds from step 1 and 2 more sharply.
Waterbomb base
The waterbomb base, sometimes called the balloon base, collapses a square into a triangle. It is named after the traditional waterbomb, an inflatable paper cube, and is also used for the tulip, some frogs and many other models.
- Start with the coloured side up. Fold in half edge to edge both ways, unfolding after each.
- Turn the paper over. Fold in half diagonally both ways, unfolding after each.
- Turn the paper back to the coloured side.
- Push the left and right edges in toward the centre along the creases, and let the top half fold down behind the bottom half.
- Flatten into a triangle, with the point at the top.
Square base vs. waterbomb base
The square base and the waterbomb base use the same set of creases — both diagonals and both edge-to-edge folds. The difference is which creases are valleys and which are mountains:
| Square base | Waterbomb base | |
|---|---|---|
| Final shape | Small square with four flaps | Triangle |
| Diagonal creases (seen from the outside) | Valley | Mountain |
| Edge-to-edge creases (seen from the outside) | Mountain | Valley |
Because of this, you can turn one into the other by turning the base inside out. Some instructions use the names loosely, so check the picture: a small square means a square base, a triangle means a waterbomb base.
Bird base
The bird base is built from a square base and gives four long flaps. It is the starting point for the traditional crane and flapping bird, among many others. It introduces the petal fold, which is often the first truly tricky move beginners learn.
- Fold a square base and place it with the open end toward you.
- Fold the lower left and right edges of the top layer in to the centre line, making a kite shape.
- Fold the top triangle down over these flaps and crease firmly.
- Unfold the top triangle and the two side flaps.
- Lift the bottom corner of the top layer up, folding along the horizontal crease from step 3. As it rises, the sides will fold inward along the creases from step 2.
- Flatten it into a long diamond. This is a petal fold.
- Turn over and repeat steps 2–6 on the other side.
The finished bird base is a long, thin diamond with two “legs” at the bottom that can be split apart. Sharp creases in steps 2 and 3 make the petal fold much easier.
Other bases worth knowing
- Blintz base: fold all four corners of a square to the centre. This is the start of the fortune teller in our guide to easy origami for beginners, and blintzing a sheet before folding another base gives extra points.
- Fish base: made by folding kite folds at both ends of a diagonal and forming the extra paper into two small flaps. It is used for fish and some birds.
- Frog base: made from a square base by squash-folding each of the four flaps and then petal-folding them. It is used for the traditional frog and lily.
Which base to learn first
Start with the kite base, then the square base, then the waterbomb base. Once the square base collapses cleanly, move on to the bird base. If you struggle to follow the drawings in books, our guide on how to read origami diagrams explains the arrows used for collapses and petal folds.
Use paper that is at least 15 cm (6 in) square for practice; larger sheets are more forgiving. If you only have printer paper, you can cut a square from A4 or letter paper first.