Origami Toys

Origami Pokemon Step by Step: Pikachu to Charizard

Fold origami Pokemon step by step, from an easy Pikachu face and waterbomb Jigglypuff to a simplified Charizard, with paper tips and a skill ladder.

On this page
  1. Pick your difficulty
  2. How to make a Pikachu with paper
  3. Quick Pokemon from basic folds
  4. How to make origami Charizard step by step
  5. Is Charmander baby Charizard?
  6. Paper and coloring tips for Pokemon origami
  7. Displaying and storing your Pokemon

Pokemon are a favorite subject for origami, and there’s a model for almost every skill level. A Pikachu face takes about two minutes. A full Charizard with legs, horns and a flame on its tail can take an experienced folder an hour or more. This guide starts easy and works up, so you can build the skills you need along the way.

Pokemon character designs belong to their owners. Fan-folded models like these are a common hobby for personal use, but avoid selling them.

Pick your difficulty

Pokemon Starting fold Difficulty Rough time
Pikachu (face) Simple triangle Beginner 2–5 minutes
Poké Ball Waterbomb balloon Beginner 5–10 minutes
Jigglypuff Waterbomb balloon Beginner 5–10 minutes
Simplified Charizard Bird base (crane base) Intermediate 20–40 minutes
Full Charizard, full-body Pikachu Designer diagrams Advanced An hour or more

Times are rough and depend on your experience.

How to make a Pikachu with paper

This easy Pikachu face uses the same idea as the classic origami cat face. You need one yellow square. A 15 cm (6 in) square is a good size. You’ll also want a black and a red marker.

  1. Place the square yellow side down. Fold it in half diagonally so the yellow is on the outside. Turn it so the long folded edge is at the top and the point is at the bottom.
  2. Fold the left and right corners down so they meet at the bottom point. You now have a diamond shape.
  3. Fold each of those flaps back up at an angle, so the tips stick out above the top of the diamond, pointing up and slightly outward. These are Pikachu’s ears. Make them tall and narrow, because Pikachu’s ears are longer than a cat’s.
  4. Fold the bottom point up a little to flatten the chin.
  5. Fold the top point down a little to flatten the top of the head between the ears.
  6. Turn the model over.
  7. Draw the face: two black eyes with white highlights, a small nose, a curved mouth and red circles for cheeks. Color the tips of the ears black.

If the ears look short, unfold step 3 and fold the flaps up at a steeper angle so more of each point sticks out.

Quick Pokemon from basic folds

The waterbomb balloon, a traditional inflatable paper ball, makes a great starting point for round Pokemon. Our guide on how to make a ball shape with paper has the full steps.

  • Poké Ball. Fold a waterbomb balloon from white paper. Color the top half red, draw a thick black band around the middle, and add a white circle with a black outline for the button. Red-and-white duo paper saves on coloring.
  • Jigglypuff. Fold a waterbomb balloon from pink paper. Draw big eyes and a small mouth, and add the curl of hair with a marker. The small corner points on the balloon can stand in for ears.
  • Others. Simple face-style versions of Charmander, Squirtle, Bulbasaur and many others are available as video tutorials. They usually start from a triangle, like the Pikachu above, and use color and drawing to do most of the work.

How to make origami Charizard step by step

There’s no single “official” origami Charizard. Many designers have created their own, ranging from simplified dragon shapes to complex models with every claw. The version below is a beginner-friendly simplified Charizard based on the bird base, the same base used for the traditional crane. It gives you a recognizable winged dragon with a long neck and tail. It doesn’t have legs, which need a more complex base.

Simplified crane-based Charizard

You need one orange square, 15 cm (6 in) or larger. Orange paper with a cream or yellow reverse side lets some of the lighter color show on the belly. Have a red or yellow marker ready for the tail flame.

  1. Fold a bird base. Fold a square base (preliminary base), then petal-fold the front and back to make the long diamond-shaped bird base, as you would for a crane.
  2. Narrow the legs of the base. With the open end of the diamond pointing down, fold the lower edges of the front layer in to meet the center line. Turn over and repeat. The two lower points are now thin.
  3. Make the neck and tail. Inside reverse fold one thin point up between the wings to make the neck. Inside reverse fold the other up on the other side to make the tail.
  4. Make the head. Inside reverse fold the tip of the neck down to make the head. A slightly longer head looks more like a dragon.
  5. Shape the tail. Curve the tail gently, or add a small inside reverse fold near the tip so it angles out.
  6. Fold the wings. Fold the two large flaps down on each side as wings. To suggest Charizard’s wing ribs, fold two or three narrow pleats in each wing, fanning out from the body.
  7. Finish it. Color the tip of the tail red, orange or yellow for the flame. Add eyes with a fine black pen, and gently curve the neck forward.

If you can already fold a crane, this should feel familiar. If not, fold a few cranes first. Charizard is much easier once the bird base is second nature.

Going further: full Charizard models

Full Charizard models with legs, horns, claws and a sculpted tail flame come from designers’ diagrams and video tutorials. They usually need:

  • Larger, thinner paper. Many complex models work best from 25 cm (10 in) or larger squares, so the small points aren’t too thick.
  • Advanced techniques such as sinks, swivel folds and closed-sink folds.
  • Shaping time. A lot of the character comes from gently curving the neck, wings and tail at the end.

A good learning path is the crane, then the flapping bird, then a simple dragon, then a full Pokemon model.

Is Charmander baby Charizard?

Charmander is the first stage of Charizard’s evolution line, not a “baby Pokemon” in the games’ official sense. In the main games, Charmander evolves into Charmeleon at level 16, and Charmeleon evolves into Charizard at level 36. “Baby Pokemon” is a separate category in the games, used for Pokemon such as Pichu, which evolves into Pikachu.

For folders, that makes a fun project: fold all three stages from the same shade of orange paper and display them in a row.

Paper and coloring tips for Pokemon origami

  • Choose paper in the character’s color. It’s easier than coloring a whole model, and the result looks neater.
  • Use duo paper where it helps. Orange on one side and cream on the other suits Charizard and Charmander. Red-and-white suits a Poké Ball.
  • Draw faces after folding. Your lines land exactly where you want them, rather than drifting with the folds.
  • Use fine markers. Alcohol markers and gel pens can bleed through thin origami paper, so test on a scrap first.
  • Go bigger for detail. A larger sheet makes small features like ears and horns much easier to fold.

Displaying and storing your Pokemon

Simple faces look good stuck to a card or a notebook cover. Three-dimensional models do best on a shelf away from direct sun, which can fade origami paper over time. If you also collect Pokemon cards, you can fold a matching sleeve. See how to make a card holder out of paper.

Looking for more character and action models? Browse the full origami toys guide, or try battling with paper tops in origami transformers and beyblades.

The complete guide to origami toys

Origami Toys: Paper Models That Move and Play
Read the guide

Keep exploring

Guides from other topics

All topics →