Origami Toys

Origami Transformers and Beyblades

How paper transformers work, how to build a simple origami tank, and how to make a Pegasus-style origami beyblade that spins, with battle rules and tips.

On this page
  1. What “origami transformer” usually means
  2. Origami tank transformer
  3. The transforming ninja star: a simpler transformer
  4. Origami beyblade (Pegasus style)
  5. What makes a paper top spin longer
  6. Paper beyblade battles: simple rules
  7. Safety notes

Transformers and beyblades are two of the most-searched toy ideas in origami, and both are great fun to fold. They work a little differently from most origami, though. Paper transformers are usually built from several folded parts, and paper beyblades are spinning tops that need balance as much as good folding. This guide explains how both work and gives you projects you can build today.

What “origami transformer” usually means

When people talk about origami transformers, they usually mean one of three things:

  1. Tank-to-robot style models. These are made from several folded modules joined by paper hinges or tabs, so parts can swing out into arms and legs. Most are designs shared as video tutorials, and many use a little glue or tape.
  2. Transforming modular models. These are made from identical units that slide against each other, so the whole model changes shape. The best-known example is the transforming ninja star, which shifts between a star and a ring.
  3. Action models that change pose. These are single-sheet models that fold open or closed, like a flapping bird or a fortune teller.

Pure single-sheet origami that converts from a tank into a standing robot is rare and very advanced. If you see one, expect a long video and a large sheet of thin paper.

Origami tank transformer

How tank-to-robot paper models work

Most paper tank transformers break the toy into a few parts:

  • The hull, which often splits into the legs.
  • The turret, which becomes the chest or head.
  • The barrel, which becomes an arm or a hand-held cannon.
  • The tracks, which fold down as feet or stay on the legs.

The parts are joined with hinges, often folded paper tabs slotted into pockets, or strips of tape on simpler versions. That’s what lets the model swing from one form to the other.

Building a simple paper tank

This simple tank is built from separate origami parts. It’s a good first project, and the parts can be reused when you try transforming designs.

You’ll need two squares (15 cm and about 10 cm), one half sheet for the barrel, two thin strips for the tracks, and glue or tape.

  1. Hull. Fold a traditional masu box from the 15 cm square and turn it upside down. That’s the body of the tank.
  2. Turret. Fold a second masu box from the smaller square and set it upside down on top of the hull, slightly toward the back.
  3. Barrel. Fold the half sheet in half lengthwise, unfold, fold both long edges to the center, and fold in half again. Repeat until you have a thin, stiff stick. Glue or tape it to the front of the turret.
  4. Tracks. Fold each strip into narrow accordion pleats, so they look like track segments. Glue one along each side of the hull.
  5. Details. Add a hatch, numbers or camouflage patches with markers.

Adding the transformation

To make the tank transform, rebuild it so the parts are hinged rather than glued in place. Here are some ideas to try:

  • Make the hull from two narrow boxes instead of one, joined with a tape hinge at the back, so they swing down into legs.
  • Attach the turret with a single hinge so it flips up into a head or chest.
  • Hinge the barrel at one end so it swings down to become an arm.

Test each hinge before you add the next, because a hinge that’s too tight can stop the whole model from moving. If you want a fully worked-out design, search for “origami tank transformer” tutorials and follow one closely the first time. You’ll pick up hinge tricks you can reuse in your own designs.

The transforming ninja star: a simpler transformer

If you want a transformer that’s pure origami with no glue, try the transforming ninja star. It’s built from eight identical units, usually from eight small squares, that interlock in a ring. Push the points together and it opens into a ring with a hole in the middle. Pull them apart and it becomes an eight-pointed star.

Try the classic two-piece shuriken first, so you get used to tucking points into pockets. See how to fold a paper ninja star.

Origami beyblade (Pegasus style)

A paper beyblade is a spinning top. You won’t match a plastic-and-metal beyblade, but a well-balanced paper top can spin for a good while and is fun to battle.

Beginner beyblade from a ninja star

The easiest working paper beyblade uses a ninja star as the disc.

  1. Fold a ninja star from two squares, using 7.5 cm or 10 cm paper. Make the creases sharp so the star is flat and stiff.
  2. Make the axle. Snip off the sharp tip at one end of a wooden toothpick, so you have a flat end.
  3. Push the toothpick through the exact center of the star, where the two pieces overlap. Leave about 1 cm sticking out below as the spinning tip, with the remaining pointed end facing down.
  4. Fix it in place with a small dab of glue on both sides of the star, and let it dry.
  5. Spin it. Hold the top of the toothpick between your thumb and finger and twist it quickly onto a smooth table.

If it wobbles, the toothpick is probably off center or tilted. Pull it out and try again a little closer to the middle.

Modular spinning tops

Many paper tops online are modular, built from four, six or eight identical folded units that lock into a disc or a bowl shape. Some include a folded point underneath so they don’t need a toothpick. They take longer, but they tend to be sturdier and better balanced, because every unit is the same. Pick a tutorial and fold all the units from the same size paper.

Making it look like Pegasus

Pegasus-themed beys from the Beyblade Metal series, such as Storm Pegasus, are mostly blue, white and silver, with wing shapes around the edge. To give your paper top that look:

  • Fold the units or the star from blue and white paper, alternating colors if your design allows.
  • Use silver or metallic foil paper for one layer, to suggest the metal wheel.
  • Add wing shapes or a small Pegasus symbol in the center with markers.

What makes a paper top spin longer

  • Balance. Every part should be the same size and weight. One thick point will make it wobble.
  • Weight at the rim. Tops spin longer when more mass sits near the outside edge, like a flywheel. Extra layers at the points help.
  • A short, centered tip. A long tip makes the top tippy, so keep the part below the disc short.
  • A straight axle. The toothpick must sit at a right angle to the disc.
  • A smooth surface. Spin it on a hard, smooth table or tray, not a tablecloth or carpet.

Paper beyblade battles: simple rules

  1. Make a stadium. A large, shallow mixing bowl, a plastic tub lid with a rim, or a baking tray works.
  2. Launch together. Count down “3, 2, 1, let it rip!” and spin both tops into the stadium at the same time.
  3. Score it. A top that’s knocked out of the stadium loses. If both stay in, the last one still spinning wins.
  4. Best of three. Repair any damage between rounds.

Safety notes

  • Toothpicks are sharp. An adult should help younger children cut and fit them.
  • Keep spinning tops below face height, and don’t launch them at people.
  • Small paper parts and toothpicks aren’t suitable for very young children who might put them in their mouths.

For more moving and playable paper models, see our origami toys guide or try the origami fidget toys you can twist and squash.

The complete guide to origami toys

Origami Toys: Paper Models That Move and Play
Read the guide

Keep exploring

Guides from other topics

All topics →