Why flowers make a good first origami project
Flowers are among the most popular origami subjects, and many of the classic designs are good for beginners. A simple flower can be finished in a few minutes from one square of paper. It also looks good even when the folds aren’t perfect, and the same few techniques come up again and again, so each flower you fold makes the next one easier.
This guide starts with the easiest flower we know, a flat tulip, and walks through it step by step. After that you’ll find a progression of 3D flowers to try next, plus ideas for displaying them.
What you need
- Square paper. Origami paper (often called kami) is thin, crisp and holds a crease well. A 15 cm (about 6 inch) square is a comfortable size for learning. Printer paper cut into a square works for the simplest models, but it’s thicker and tears more easily on flowers with many layers.
- Two-tone paper, if you have it. Paper that is colored on one side and white on the other makes it easier to see which side should face up in each step.
- Green paper for stems and leaves. This is optional, but it makes flowers look finished.
- A flat, hard surface. A table works better than your lap for sharp creases.
- Optional: a glue stick, a pencil for curling petals, and wooden skewers if you plan to make a bouquet of origami flowers.
Folds and bases you’ll see in flower instructions
You don’t need to learn every origami term before you start, but these come up constantly in flower instructions:
- Valley fold: fold the paper toward you so the crease sinks like a valley.
- Mountain fold: fold the paper away from you so the crease stands up like a ridge.
- Crease and unfold: fold, press the crease firmly, then open it again. These creases are guides for later steps.
- Squash fold: lift a flap, open it slightly, and press it flat into a new shape.
- Blintz fold: fold all four corners of a square to the center. The origami lotus is built almost entirely from blintz folds.
- Preliminary (square) base: a square folded so it collapses into a smaller, layered square. It’s the starting point for the origami lily.
- Waterbomb (triangle) base: the reverse of the preliminary base, which collapses into a layered triangle. It’s the starting point for the 3D origami tulip.
If you’ve never folded before, our guide on how to fold origami step by step explains how to make clean creases and read origami diagrams.
Your first flower: an easy flat tulip, step by step
This tulip uses only valley folds, so it’s a good first project for children as well as adults. You’ll need one square for the bloom and one green square for the stem. If the stem square is the same size as the bloom square, or a little larger, the proportions look natural.
Fold the bloom
- Start with the colored side down. Fold the square in half from corner to corner to make a triangle, with the colored side outside.
- Position the triangle so the long edge is at the bottom and the point is at the top.
- Fold the bottom-left corner up at a slant so its tip ends up beside the top point, sticking up a little past the top edge and slightly out to the side. This is the first petal.
- Repeat with the bottom-right corner. Fold it up to mirror the first petal. You now have a cup shape with three points at the top (two petals and the original top point) and a new point at the bottom.
- Turn the bloom over. If you like, fold the small bottom point up behind a little so the base of the flower is blunt. This also gives the stem something to tuck behind.
There’s no exact angle for steps 3 and 4. Folding the petals more upright makes a narrow, closed tulip, while folding them out wider makes an open one.
Fold the stem and leaf
- Place the green square as a diamond and crease it in half from the top corner to the bottom corner, then unfold.
- Fold the two lower edges in to meet the center crease. This is a kite fold.
- Fold the two upper edges in to meet the center crease too, so you have a long, narrow diamond.
- Fold the bottom point up to meet the top point.
- Fold the model in half lengthwise along the center.
- Hold the folded bottom and gently pull the inner flap out to the side at an angle. That flap is the leaf, and the outer part is the stem. Press the bottom firmly to set the shape.
Put it together
Slide the top of the stem behind the bloom, or into the gap at the bottom of the bloom, and secure it with a small dab of glue. A flat tulip like this works well on greeting cards, bookmarks and classroom displays. It also fits nicely in a flat origami vase.
Origami flowers to try next, from easiest to hardest
Once the flat tulip feels easy, these flowers add one new skill at a time.
3D tulip
The traditional 3D tulip is the natural next step. It starts from a waterbomb base, has a simple locking tuck, and ends with a satisfying moment where you blow into the bottom and the bloom puffs up. Our guide to folding an origami tulip with a stem and leaf covers the bloom, the stem and how to join them.
Easy rose
Many “easy” origami roses are simplified designs that use repeated corner folds and curled petals rather than the complex twist folds of advanced rose designs. Try our easy origami rose when you’re comfortable folding corners precisely to a center point.
Lotus
The traditional origami lotus uses only one type of fold, but it builds up many layers, and pulling the petals out takes patience. Larger, thinner paper helps a lot.
Lily
The traditional origami lily introduces squash folds and petal folds, two techniques that also appear in the crane and many other classic models. It’s the most technical flower on this list, and learning it opens up a lot of intermediate origami.
Kusudama flower
A kusudama flower is made from five identical petals glued together, and twelve of those flowers can be glued into a decorative kusudama ball. It’s not difficult, just repetitive. To fold one petal:
- Fold a small square in half diagonally into a triangle and place it with the point up.
- Fold the left and right bottom corners up to the top point, making a smaller diamond.
- Fold each of those two flaps in half outward, so their center edges line up with the outer edges of the diamond.
- Open each flap and squash it flat.
- Fold the small triangles that stick up above the squashed flaps down behind them.
- Fold the two squashed flaps in half again along their existing creases, then curl the piece into a cone and glue the outer flaps together.
Make five petals, let the glue dry, then glue them side by side around a center point. Waiting for the glue on each petal to dry before you assemble the flower makes the job much easier.
What to do with your flowers
- Make a bouquet. Put several flowers on stems, arrange them by height and wrap them in paper. Our guide to making an origami flower bouquet walks through each stage.
- Fold a vase. A flat or 3D origami vase holds paper flowers without glue. For other approaches, see our roundup of ways to make paper vases at home.
- Decorate cards and gifts. Flat flowers sit neatly on cards. Small 3D flowers can top a gift box.
- Combine with drawing. A quick sketched background, or a simple drawn flower, pairs well with folded flowers on a card or poster.
Beginner fixes for common problems
- The flower looks puffy or loose. Your creases probably aren’t firm enough. Press each fold down with a fingernail or the side of a pen, working from the center of the crease outward.
- The points don’t meet neatly. Line up the corners or edges first, hold them in place, and only then press the crease. Small errors early on grow larger in later steps.
- The paper tears. This usually happens when the paper is too thick or too small for the number of layers. Try larger or thinner paper, and open tight layers slowly.
- Your model doesn’t match the instructions. Check whether you missed a “turn over” step or folded a mountain fold where a valley fold was needed. Rotating the paper to match the picture can also help.
- The petals look uneven. That’s normal on early attempts. Folding the same flower three or four times usually fixes it, because your hands learn where each fold lands.
Frequently asked questions
Is origami good for your brain?
Origami is often described as good for focus, patience, fine motor skills and spatial thinking, because you have to follow a sequence carefully and picture how flat paper becomes a 3D shape. Some research and many teachers support using it to build spatial skills in children. That said, it’s best thought of as an engaging, hands-on hobby rather than a proven brain-training tool. Many people also find the repetitive folding relaxing.
What age can children start folding origami flowers?
Many children around 5 or 6 can fold very simple flowers like the flat tulip with a little help. Flowers with squash folds or petal folds, such as the lily, usually suit older children or adults who have some folding experience.
How long does an origami flower take?
A flat tulip can take just a few minutes once you know it. Your first attempt at a lily or lotus may take 20 minutes or more, but repeat folds get much faster.
What paper should I use for origami flowers?
For learning, use 15 cm origami paper. Duo paper (a different color on each side) looks especially good on lilies and tulips, where both sides show. For flowers with many layers, such as the lotus, larger or thinner paper reduces tearing.