Origami Crafts

Origami Pop-Up Cards with Templates

Four origami pop-up card templates with exact measurements: a basic step, a three-block skyline, a V-fold and a folded flower bouquet, plus assembly tips.

On this page
  1. What makes a pop-up card “origami”
  2. Materials
  3. Template 1: the basic step pop-up
  4. Template 2: a three-block skyline
  5. Template 3: a V-fold with a folded model
  6. Template 4: a folded-flower bouquet card
  7. Putting the card together
  8. Troubleshooting
  9. Making greeting cards for free
  10. What about an “origami pop it”?

A pop-up card looks complicated, but the most useful mechanisms come down to a fold, a couple of cuts, and a bit of glue. Below are four templates written as measurements, so you can draw them straight onto your own paper with a pencil and ruler. No printer is needed. Each one combines a pop-up mechanism with a folded origami element on top.

What makes a pop-up card “origami”

Strictly, origami avoids cutting. Most pop-up cards use at least two cuts, which puts them closer to kirigami, the cut-and-fold cousin of origami. The detailed single-sheet buildings and patterns known as origamic architecture are a well-known kirigami style, popularized in the 1980s by Japanese architect Masahiro Chatani.

In practice, an “origami pop-up card” usually means one of two things:

  • a pop-up mechanism decorated with folded models (cranes, flowers, hearts, stars), or
  • a pop-up made entirely by folding, such as a V-fold piece glued across the card’s center.

The templates below cover both.

Materials

  • Cover card: medium-weight cardstock, such as a Letter or A4 sheet folded in half.
  • Inner pop-up sheet: a second sheet of lighter cardstock or heavy paper, trimmed about 0.5 cm (1/4 in) smaller than the cover on every side.
  • Origami paper for the folded decorations. Small squares, 7.5 cm (3 in) or less, suit most cards.
  • Pencil, ruler, craft knife or scissors, cutting mat.
  • Glue stick for large areas and a fine-tip liquid glue for attaching folded models.
  • A bone folder or the back of a butter knife for scoring cardstock.

Tip: score cardstock along the fold line before folding it. Folds come out straighter, and the card is less likely to crack.

Template 1: the basic step pop-up

This is the foundation for most simple pop-up cards: a block that stands up from the card’s center fold when it opens.

  1. Fold the inner sheet in half and keep it folded, with the folded edge facing you.
  2. Measure in from each side to find the center of the folded edge.
  3. Mark two parallel lines running from the fold into the paper, 4 cm (1.5 in) long and 6 cm (2.5 in) apart, centered on the fold.
  4. Cut along both lines through both layers.
  5. Fold the strip between the cuts back along the line joining the ends of the cuts. Crease firmly, fold it the other way, then unfold.
  6. Open the sheet to a right angle and push the strip through to the inside so it stands out as a block. Close the sheet and press to set the creases.

The block stands out about as far as the cuts are long, and it’s about the same height. So 4 cm cuts give a block roughly 4 cm deep and 4 cm tall. Longer cuts give a bigger block. The spacing between the cuts sets its width.

Glue a folded heart, crane or star to the front face of the block.

Template 2: a three-block skyline

Several step pop-ups side by side, with different cut lengths, make a staircase, a podium or a city skyline.

  1. Fold the inner sheet in half with the folded edge facing you.
  2. Mark three pairs of cuts along the fold, leaving at least 1 cm (3/8 in) of uncut fold between neighboring pairs:
    • left block: cuts 2.5 cm long, 3 cm apart
    • middle block: cuts 4 cm long, 3.5 cm apart
    • right block: cuts 3 cm long, 3 cm apart
  3. Cut, crease and push through each block as in Template 1.

Decorate each face with folded windows, small folded stars or a row of tiny houses. For a birthday card, put a folded number on each block.

Template 3: a V-fold with a folded model

A V-fold is a separate folded piece glued across the card’s center fold. It stands up as the card opens, with no cuts in the card itself.

  1. Cut a rectangle of cardstock 10 cm wide by 7 cm tall (about 4 by 2.75 in) and fold it in half to 5 by 7 cm.
  2. Along the bottom edge, fold up a 1 cm (3/8 in) tab on each half, folding the tabs outward, away from each other.
  3. Open the card flat. Glue one tab to each side of the center fold, so the bottom of the piece’s own fold sits exactly on the card’s center fold. Both tabs should make the same angle with the center line.
  4. Before the glue sets, close the card gently. The piece should fold flat inside without poking past the edges. Adjust if it doesn’t.
  5. Glue a folded model, such as a crane or butterfly, to the front of the V.

You can also cut the V-piece into a shape before folding, such as a heart or tree outline. Keep the fold and the tabs intact.

Template 4: a folded-flower bouquet card

This card combines a step pop-up “vase” with folded flowers.

  1. Make a Template 1 step with cuts 3 cm long and 5 cm apart. This is the vase.
  2. Cut 3 to 5 thin strips of green paper, about 0.5 cm wide and 6 to 9 cm long, for stems.
  3. Glue the bottom of each stem behind the vase’s front face, fanning them out so they rise above it.
  4. Fold small flowers from 5 to 7.5 cm (2 to 3 in) origami squares. Simple tulips or lilies work well.
  5. Glue a flower to the top of each stem. Check that the card closes, trimming any stems that stick out past the cover.

Putting the card together

  1. Finish the inner pop-up sheet and let any glue dry.
  2. Fold the cover card in half.
  3. Apply glue to the back of the inner sheet. Keep glue well away from the pop-up area, the back of every cut block and V-fold, or it won’t open.
  4. Line up the inner sheet’s center fold with the cover’s fold and press it down, one half at a time.
  5. Close the card and leave it under a book until dry.
  6. Write your message on the inside around the pop-up, or on a separate panel glued to the back.

Troubleshooting

  • The pop-up sticks out when the card is closed. The cuts are too long for the card, or a folded decoration is too big. Shorten the cuts on your next attempt, or trim the decoration.
  • The block won’t stand up. The creases at the ends of the cuts aren’t sharp enough. Re-crease both directions.
  • The cover cracked along the fold. Score heavier cardstock before folding.
  • The card won’t open flat. Glue has crept onto the back of a pop-up piece. It’s usually best to remake the inner sheet.
  • Folded models flatten when the card closes. Use smaller, flatter models, or attach them with a small dot of glue so they can flex.

Making greeting cards for free

You don’t need a craft store to make these. Free options include:

  • printer paper for the inner sheet, folded double for extra stiffness
  • the plain side of a cereal box or other packaging for the cover
  • leftover wrapping paper, magazine pages or old maps for folded decorations
  • pencil-and-ruler templates like the ones above instead of printables

For more mechanisms, including pull tabs, accordion springs and pop-up books, see our guide on how to make a homemade pop-up.

What about an “origami pop it”?

Searches for “origami pop it” usually mean a paper version of the silicone push-bubble fidget toy, not a pop-up card. Paper versions typically use a grid of small folded or shaped bubbles that you press in and out. It’s a fun kids’ project, but it works differently from the cards above.

If you like gifting folded paper, a jar of origami lucky stars pairs nicely with a handmade card. You’ll find more ideas in our collection of crafts from origami paper.

The complete guide to origami crafts

Crafts from Origami Paper: Decor, Gifts and DIY Ideas
Read the guide

Keep exploring

Guides from other topics

All topics →