“Origami vase” can mean two quite different projects. A flat vase is folded from a single square in a few minutes. It’s meant for cards, scrapbooks and wall art. A 3D vase is usually built from hundreds of small folded units slotted together in rings. This style is often called 3D origami or modular origami, and it takes hours rather than minutes. This guide covers both.
Flat or 3D: which origami vase to make
| Flat vase | 3D modular vase | |
|---|---|---|
| Paper | One square | Many small rectangles |
| Time | A few minutes | Many hours |
| Holds stems? | Flat flowers only, glued or tucked | Yes, paper flowers on stems |
| Best for | Cards, wall art, kids’ crafts | Display pieces, gifts |
Flat origami vase in 5 basic steps
This simple design uses one square, roughly 15 cm, ideally colored on one side and white on the other. Exact angles aren’t important. Adjust them to change the vase’s shape.
- Crease the center. With the white side up, fold the square in half from left to right, then unfold. You now have a vertical center crease.
- Fold the sides to the center. Fold the left and right edges in so they meet at the center crease. This is a cupboard fold. The front now shows the colored side, as a tall rectangle.
- Shape the shoulders. Mountain fold the top-left and top-right corners behind, at a slant, through all layers. Start each fold about a third of the way down the side edge and finish it at the top edge a little way in from the corner. The top of the shape is now narrower, like a vase’s neck and shoulders.
- Open the mouth. On the front, fold the top inner corner of each flap outward diagonally to make two small triangles. This exposes the white paper underneath in a V shape, which reads as the opening of the vase.
- Shape the base. Mountain fold the two bottom corners behind as small triangles so the base is slightly narrower than the body.
Turn the vase over to check the outline. If it looks too boxy, make the shoulder folds steeper. If the mouth is too wide, make the triangles in step 4 smaller.
Ideas for using a flat vase
- Greeting cards: Glue the vase onto a card and tuck flat flowers, such as the flat tulip from our origami flowers for beginners guide, into the mouth so they look like they’re standing in it.
- Wall art: Mount several vases with different flowers on a backing board.
- Drawing combos: Fold the vase, then draw the stems and flowers above it. Our guide on drawing a simple flower shows an easy way to do that.
3D origami vase from modular units
The popular 3D origami vases you see in photos are usually made from small triangular units. This unit is often associated with the Golden Venture style of folding. Each unit has two points and two pockets, and the points of one unit slide into the pockets of two units in the row below. Rows build up into rings, and shaping the rings makes the vase.
To give a sense of scale, one crafter’s 15 cm tall modular vase used about 750 units, each 2.6 to 3.8 cm, and took roughly 16 hours to make. Smaller, simpler vases need fewer units. Plan for a substantial project anyway.
What you need
- Paper rectangles. A common approach is to cut A4 or letter paper into 16 or 32 equal rectangles. Smaller units give a finer look but take longer to fold.
- Glue. It’s optional during building, but recommended once the shape is finished.
- Patience, plus a container to keep finished units together.
Fold the triangle units
- Fold a rectangle in half lengthwise.
- Fold it in half the other way to mark the middle, then unfold that second fold.
- With the long folded edge at the top, fold the two top corners down to meet the center mark. The top now forms a triangle.
- Turn it over.
- Fold the small corners of the bottom strip up over the edges of the triangle.
- Fold the bottom strip up along the base of the triangle.
- Fold the whole piece in half along the center. The unit now has two points at one end and two pockets on the long edge.
Your first few units may come out uneven. Compare them with a photo or diagram of a finished unit, then fold the rest in a batch once the shape is consistent.
The 5 basic stages of a modular vase
- Plan the size and colors. Decide how many units go in each ring and how many rows tall the vase will be. Color patterns, such as stripes or zigzags, are planned row by row.
- Fold all the units. Folding in batches is faster and gives more consistent units.
- Build the base rings. Make the first two rows together. Each unit in the second row straddles two units in the first, with its points in their pockets. Close the strip into a ring once you have the planned number of units.
- Build and shape the body and neck. Keep adding rows. Changing the angle of the rows (pushing them outward or inward) widens the body or narrows the neck. Some patterns also change the number of units per row to shape the vase.
- Finish it. Flare the top rows outward for a lip, then glue the units in place so the vase holds its shape over time.
Shaping tips
- Work on a flat surface for the first several rows so the base sits level.
- Turn some rows upside down, or change their direction, to create distinct bands and textures.
- Protect a finished vase from dust with a glass cover or display case, or seal it with a clear coating if you prefer.
Will an origami vase hold water?
No. Neither flat nor modular origami vases are watertight, and water will soften the paper and ruin the shape. For fresh flowers, put a small glass or plastic container inside a large 3D vase and keep the water away from the paper. Our guide on how to make paper vases at home covers other paper vase methods, including liners.
Filling your vase
Paper flowers on stems are the natural choice. Origami tulips and origami lilies both stand well in a 3D vase, and a smaller version of an origami flower bouquet makes a complete display.