Origami Crafts

How to Make an Origami Garland

How to make an origami garland: the best models to fold, how many you need, four ways to string them, how to stop sliding, and tips for hanging and storage.

On this page
  1. Good models for a garland
  2. What you need
  3. Plan length and spacing
  4. Step 1: Fold your models
  5. Step 2: Choose a stringing method
  6. Step 3: Stop models sliding
  7. Step 4: Hang it
  8. Crane garlands and senbazuru
  9. Storage and safety

An origami garland is one of the most forgiving folded paper projects. Each model is simple, small mistakes disappear once dozens are strung together, and the finished string brightens a mantel, a window or a party table. This guide covers which models work best, how to plan length and spacing, and four ways to string models, plus hanging, storage and safety tips.

Good models for a garland

Model Look Stringing method
Cranes Classic, elegant Needle and thread through the center
Lucky stars Small, puffy, playful Needle and fine thread
Hearts Flat, sweet; good for Valentine’s Day and weddings Glue onto twine, or clip
Simple stars (flat or 3D) Festive; good for holidays Glue, clip, or needle through a point
Accordion fans Bold, quick, party-style Glue or tie onto twine
Butterflies Light, springlike Glue onto twine, or clip
Paper boats or houses Themed garlands for nurseries or seaside decor Clip or glue

If you’re new to origami, start with hearts or fans, which are quick and flat. Cranes and lucky stars take longer but look striking in quantity. For lucky stars, follow our guide to folding origami lucky stars.

What you need

  • Paper. Origami squares, roughly 7.5 to 15 cm (3 to 6 in). Double-sided paper looks better on hanging models, since both sides show.
  • String. Cotton baker’s twine, embroidery floss, fishing line (nearly invisible), or thin ribbon.
  • A needle with an eye large enough for your thread, if threading models.
  • Small beads, as spacers and stoppers (optional).
  • Glue dots, a glue stick or double-sided tape, for glue-on methods.
  • Mini clothespins or clips, for clip-on garlands.

Plan length and spacing

Measure where the garland will hang, and allow extra string for ties at each end and for the drape if it will hang in a curve.

A simple way to work out how many models you need:

number of models ≈ garland length ÷ spacing

For example, a 2 m (about 6.5 ft) garland with a model every 10 cm (4 in) needs about 20 models. A 15 cm (6 in) spacing needs about 13.

Closer spacing looks fuller, and wider spacing is quicker to make. Fold one or two spares in case of damage.

Step 1: Fold your models

Fold all the models before stringing. It’s easier to arrange the order and colors when you can see them all.

  • Fold in batches: do the same step on every sheet before moving to the next. This is faster and keeps the models consistent.
  • Plan a color sequence, such as a repeating pattern, a gradient, or random mixed colors.
  • Lay the models out in order on a table before stringing.

Step 2: Choose a stringing method

Needle and thread through the model

This suits cranes, lucky stars and 3D shapes.

  1. Thread a needle and tie a large knot, or a bead, at the end.
  2. For a crane, push the needle up through the opening on the underside and out through the center of the back. For a lucky star, go through two opposite sides of the center.
  3. Slide the model to its position.
  4. Repeat for each model, with spacers between them (see Step 3).

Horizontal strands work well. So do vertical strands hung from a rod.

Glue or tape onto twine

This suits hearts, fans, butterflies and flat stars.

  1. Lay the twine out flat and mark the spacing with small pencil dots, or measure as you go.
  2. Put a glue dot or a strip of double-sided tape on the back of each model.
  3. Press the twine into the glue, or sandwich it between two identical models glued back to back. That hides the string and makes the garland look good from both sides.

Clips

Mini clothespins or binder-style clips let you rearrange or swap models. This is handy for seasonal garlands or displaying a child’s folding.

Vertical drops

Instead of one long horizontal line, hang several vertical strands from a rod, a branch or a curtain track. This is a good format for cranes and creates a “curtain” of models.

Step 3: Stop models sliding

Threaded models tend to slide together over time. To keep them in place:

  • Tie a small knot in the thread right below each model, and above it too if needed.
  • Thread a small bead before each model as a stopper, which also adds a little sparkle.
  • Add a tiny dot of glue where the thread exits the model.
  • Use thread spacers: thread a short length of drinking straw between models for even, consistent spacing.

Step 4: Hang it

  • Command-style removable hooks or strips are a common damage-free choice on painted walls. Test on a hidden spot first.
  • Small nails or pins in a door frame or a picture rail.
  • Tie the ends to curtain rods, bed frames, shelves or banisters.

Let the garland hang loose for a moment before fixing the second end, so you can adjust the drape.

Crane garlands and senbazuru

In Japan, a senbazuru is a group of 1,000 folded paper cranes, traditionally strung together and given or displayed with wishes for good fortune, recovery or peace. The cranes are commonly strung in vertical strands, often with a few dozen cranes per strand. Many people fold senbazuru for weddings, for someone who is ill, or for memorials.

You don’t need 1,000 cranes to make a crane garland. A single strand of 20 to 40 cranes looks lovely. But if you’re planning a larger project, a shared goal and a few friends make it far more manageable.

Storage and safety

Storage:

  • Wind the garland loosely around a piece of card, or lay it flat in a box with tissue paper between layers.
  • Store it somewhere dry. Humidity softens creases.
  • Keep it out of direct sunlight between uses to reduce fading.

Safety:

  • Keep paper garlands away from candles, fireplaces, heaters and other heat sources. Paper burns easily.
  • If you combine a garland with string lights, choose low-heat lights such as LEDs. Check the lights’ instructions about contact with paper and other flammable decorations.
  • Small beads and models can be choking hazards for young children and pets, so hang garlands out of their reach.

Garlands pair well with other folded decor. See our guide to origami wall art and hanging bird mobiles for more hanging displays. For a larger project, try making a paper mural and framing it with a garland. You’ll find more ideas in our collection of crafts from origami paper.

The complete guide to origami crafts

Crafts from Origami Paper: Decor, Gifts and DIY Ideas
Read the guide

Keep exploring

Guides from other topics

All topics →