Origami earrings are light, colorful and cheap to make, and they give you a way to wear your favorite papers. With a few basic jewelry findings and a sealant, small folded models become durable enough for regular wear. This guide covers which models work, what supplies you need, how to seal paper, and step-by-step assembly for crane, star and bead earrings.
Models that make good earrings
Good earring models are small, symmetrical, lightweight, and have a natural channel or center point for a pin to pass through.
- Cranes. The classic choice. The opening on the underside and the center of the back give a clear path for a headpin.
- Lucky stars. Puffy, sturdy and very small. Our guide to folding origami lucky stars covers the technique.
- Origami beads. Small units folded and assembled into geometric beads, threaded on a pin.
- Butterflies. Good as studs (glued to a flat stud back) or as dangles.
- Waterbomb balls or small cubes. Round, light, and they hold their shape well when sealed.
- Hearts and fans. Flat models that hang nicely from a jump ring.
Fold a test model from scrap first. Earring-sized origami is fiddly, and practicing at a slightly larger size helps.
Materials and findings
- Paper. Origami squares, roughly 4 to 7.5 cm (1.5 to 3 in) for most earring models. Smaller squares make more delicate earrings but are harder to fold.
- Ear wires or other earring hooks, plus studs with flat pads if you’re making studs.
- Headpins or eye pins, around 5 cm (2 in), to thread through models.
- Jump rings, small sizes such as 4 to 6 mm, to connect parts.
- Seed beads or small accent beads, to stop models sliding off pins and to add color.
- Pliers: flat-nose or chain-nose pliers and round-nose pliers. Flush cutters are helpful too.
- Sealant: a decoupage medium, a clear acrylic sealer or spray, or UV resin.
- A fine needle or pin, to pierce a guide hole if needed.
For sensitive ears: some people react to certain metals, nickel being a common example. If that applies to you or the person you’re making for, look for findings labeled nickel-free or hypoallergenic, or made from materials such as sterling silver, titanium or niobium. Check product details with the supplier.
Choosing paper
- Thin, crisp paper folds tiny models more accurately than thick paper.
- Patterned paper shows off well at small sizes. Choose small-scale prints, as large patterns get lost.
- Double-sided paper looks better on models where both sides show, such as cranes.
- Foil or metallic paper holds shape well and looks polished, though it can show crease marks.
- Avoid very soft papers, which fuzz and wear at the points.
Sealing: before or after folding?
You can seal either way, and many makers do both lightly.
- Seal after folding (most common). Brush or spray thin coats over the finished model, letting each dry. This protects the outside, stiffens the model, and fixes it in shape.
- Seal before folding. A very thin coat on the flat paper can make it more durable, but heavier coats may crack along creases or make the paper too stiff to fold small.
Tips for sealing:
- Apply several thin coats, not one thick one, which can pool and soften the paper.
- Let each coat dry fully before handling.
- Hang models from a pin or wire to dry, so they don’t stick to the surface.
- UV resin gives a harder, glossy finish but needs care. Cure as directed, use it in a ventilated area, and follow the manufacturer’s safety advice.
- Spray sealants should be used outdoors or in a well-ventilated space.
Sealed paper jewelry is more durable, but it’s still not waterproof in a practical sense, so remove it for swimming, showers and washing up.
How to make origami crane earrings
You need: two origami squares (about 5 to 7.5 cm / 2 to 3 in), two headpins, four small beads, two ear wires, two jump rings, sealant and pliers.
- Fold two matching cranes. Fold carefully and symmetrically, with crisp creases.
- Shape them. Spread the wings slightly, or flatten them if you prefer a sleek look.
- Seal the cranes. Apply thin coats and let them dry completely.
- Thread the pin. Slide a small bead onto a headpin. Push the pin up through the crane, entering through the opening in the underside and coming out at the center of the back. If it’s hard to find the path, make a guide hole with a fine needle first.
- Add a top bead. Slide a second bead onto the pin above the crane.
- Make a loop. Bend the pin at a right angle just above the top bead. Form a loop with round-nose pliers and trim any excess wire.
- Attach the ear wire. Open a jump ring by twisting it sideways (don’t pull it apart), hook it through the loop and the ear wire, then twist it closed. Or attach the loop directly to the ear wire.
- Repeat for the second earring, checking both hang at the same length.
Lucky star and bead earrings
Lucky star dangles:
- Fold small lucky stars from narrow strips. Thinner strips give smaller stars.
- Seal the stars.
- Push an eye pin through the star, from point to opposite side or straight through the middle, using a fine needle to start the hole.
- Loop the top and attach it to an ear wire. For a longer earring, link two or three stars with jump rings.
Origami bead earrings:
- Fold the units for your chosen bead and assemble them according to the design.
- Seal the bead and let it dry.
- Thread it onto a headpin with a seed bead above and below.
- Make a loop and attach the ear wire as above.
Beyond earrings: other paper jewelry
The same techniques work for other pieces:
- Necklaces. Hang a single crane or star from a chain as a pendant, or string a row of small folded beads.
- Bracelets. Thread sealed lucky stars or beads onto stretch cord, with a seed bead between each.
- Brooches. Glue a sealed butterfly or flower to a brooch back.
- Hair clips. Glue small folded flowers or bows to a clip blank.
- Charms. Attach small models to bag zips, phone straps or keychains. See our guide to origami bookmarks and keychains.
Caring for paper jewelry
- Keep it dry, and take it off before swimming, showering or exercising heavily.
- Store it flat or hanging, where it won’t be crushed. A small box with compartments works well.
- Keep it out of strong sunlight when not wearing it, as colors may fade.
- Touch up worn spots with a fresh thin coat of sealant if needed.
For more ways to use small folded models, browse our collection of crafts from origami paper.