Origami Basics

How do you make a paper burger?

Make a paper burger by folding separate layers — buns, patty, cheese, lettuce and tomato — from coloured squares, then stacking them. Step-by-step guide.

On this page
  1. Short answer
  2. What you need
  3. Make each layer
  4. Assemble the burger
  5. Variations
  6. Not the same as a “hamburger fold”

Short answer

The simplest way to make a paper burger is to fold each layer separately from coloured paper — a tan top and bottom bun, a brown patty, a yellow cheese slice, green lettuce and a red tomato — and then stack them. Each round layer is made by folding the corners of a square in toward the centre, which turns the square into a rough circle. Crumpled scrap paper under the top bun gives it a domed shape.

No cutting is required, and glue is optional.

What you need

  • Paper squares in these colours (sizes are suggestions; what matters is that the patty is a little smaller than the buns):
    • Tan or light brown, 15 cm (6 in): two sheets for the buns
    • Dark brown, 14 cm: one sheet for the patty
    • Yellow, about 10 cm: one sheet for the cheese
    • Green, 15 cm: one sheet for the lettuce
    • Red, 12 cm: one sheet for the tomato
  • Scrap paper for stuffing the top bun
  • Optional: white marker or pencil for sesame seeds, glue stick or tape

If you only have printer paper, you can cut squares from A4 or letter paper and colour them in.

Make each layer

Buns

The round shape for the buns, patty and tomato comes from the same few folds:

  1. Start with the coloured side facing up. Fold the square in half diagonally both ways and unfold to mark the centre.
  2. Fold all four corners to the centre point. (This is called a blintz fold.)
  3. Turn the paper over. The smooth coloured side now faces up.
  4. Fold a small triangle off each of the four corners, folding them underneath. The square now has eight sides and looks roughly round.
  5. Fold more small bits off the new corners if you want it rounder.

Make two of these from the tan squares. For the top bun, place a loose ball of scrap paper under it to make a dome, and draw small sesame seeds on top with a white marker or pencil. The bottom bun stays flat.

Patty

Fold the dark brown square in the same way as the buns. Because the starting square is slightly smaller, the patty will sit just inside the edges of the buns. You can fold the edges a little further in for a thicker-looking patty.

Cheese

A cheese slice is the easiest layer: leave the yellow square flat, or fold a narrow strip behind on each side to stiffen it. Turn it at an angle when stacking so the corners hang over the patty like a melting slice.

Lettuce

  1. Take the green square and make small accordion pleats (alternating valley and mountain folds) along all four edges.
  2. Gently pinch and crinkle the pleats so the edges look wavy.
  3. Leave the centre flat so the layers above sit evenly.

Alternatively, crumple the green sheet lightly and flatten it again for a leafy texture.

Tomato

Fold the red square in the same way as the buns to make a smaller round slice. Draw a few seeds or lines in the centre if you like.

Assemble the burger

  1. Place the bottom bun flat on the table.
  2. Add the patty, then the cheese at an angle so its corners show.
  3. Add the tomato and then the lettuce, with the wavy edges sticking out.
  4. Put the top bun on last, keeping the scrap paper underneath for height.
  5. If you want it to hold together, add a dab of glue or a small loop of tape between layers.

Swap the order or add extra layers — a second patty, onion rings from a white strip — to make your own version.

Variations

  • No-glue version: leave the layers loose so children can stack and restack them for play food.
  • For younger children: let them fold only the corners in to the centre and skip the extra rounding steps; the burger still reads clearly.
  • Single-sheet origami burgers: some origami designers have published hamburgers folded from one sheet, using colour changes to show the bun and filling. These are more challenging and are best followed from the designer’s own diagrams. Our guide on how to read origami diagrams helps if you try one.

For more first projects of a similar level, see our easy origami for beginners guide.

Not the same as a “hamburger fold”

If you were asked to “fold the paper hamburger style”, that is a different thing: it means folding a rectangle in half so the short edges meet. Our guide to basic origami folds explains hamburger and hot dog folds.

The complete guide to origami basics

Easy Origami for Beginners: Simple Paper Projects to Start With
Read the guide

Keep exploring

Guides from other topics

All topics →