Origami diagrams can show a whole model with almost no words. Once you know what the lines and arrows mean, you can follow instructions from books and websites in any language. This guide explains the common symbols and how to use them step by step.
Where origami symbols come from
Most diagrams today use a system based on the work of Japanese artist Akira Yoshizawa, later refined and popularised in English-language books by Samuel Randlett and Robert Harbin. It is often called the Yoshizawa–Randlett system.
The core symbols are widely shared, but details vary between books and designers. Many books include a symbol key at the front; if yours does, check it first.
Lines: what each one means
| Line | Usual meaning |
|---|---|
| Dashed line (- - -) | Valley fold — fold the paper toward you along this line |
| Dash-dot line (- · - ·) or dash-dot-dot | Mountain fold — fold the paper away from you along this line |
| Thin solid line | An existing crease from an earlier step |
| Thick solid line | The edge of the paper |
| Dotted line (· · ·) | A hidden edge or an imaginary line, such as where a flap will end up (sometimes called an x-ray line) |
A valley fold and a mountain fold are the same fold seen from opposite sides. Our guide to basic origami folds explains both in more detail.
Some diagrams, especially for children, use different line styles. If a line seems unusual, look at the arrow and the next picture to see what the fold should achieve.
Arrows: what each one tells you to do
| Arrow | What it means |
|---|---|
| Curved arrow with a full arrowhead | Valley fold: bring this part of the paper over in the direction of the arrow |
| Curved arrow with a half or hollow arrowhead, curving behind | Mountain fold: fold this part behind |
| Arrow that goes out and comes back | Fold and unfold — make a crease, then return the paper to where it was |
| Looped arrow (an arrow that makes a loop) | Turn the paper over |
| Circular arrows | Rotate the paper in the direction shown, often with an angle (e.g. 90°) |
| Hollow arrow, often with a notched tail | Push, sink or squash here — apply pressure at this point |
| Zigzag arrow with a pleat line | Pleat fold — a valley and a mountain fold next to each other |
| Arrow with small tick marks on its tail | Repeat the step — each mark usually means one more repetition |
The arrowhead shows where the paper ends up, and the tail usually starts at the part that moves.
Other marks you will see
- Shading or colour: the coloured side of the paper is usually shown shaded or coloured, and the white side left blank. This tells you which side faces up.
- Equal marks: matching tick marks on two segments mean they are the same length; matching arcs mean two angles are equal. They are often used for folds that split an angle in half.
- Circles or dots at points: a point to line up with, or a reference spot such as where a flap tip should land.
- Enlarged view: a symbol or a change in drawing scale showing that the next picture is zoomed in.
- “Repeat behind” or “×2”: do the same step on the back or on the other flaps.
- Step numbers: follow them in order — skipping ahead is the most common cause of a model going wrong.
How to work through a diagram step by step
- Read the symbol key if the book or sheet has one.
- Check the starting orientation. Is the coloured side up? Is the paper a square or a diamond?
- Look at the line to see where the fold goes, and the arrow to see which way it moves.
- Look at the next picture. It shows what the paper should look like after the fold — often the most useful clue on the page.
- Find the landmarks. Folds usually line up with an edge, corner or existing crease. Match them before you press.
- Crease firmly, then compare your paper with the next picture before moving on.
- Rotate your paper to match the drawing, or rotate it to whatever angle is comfortable for your hands.
When a step involves several things moving at once, such as a squash or petal fold, it often helps to pre-crease the lines shown first, then make the move along those creases. These moves are common when forming the square, bird and waterbomb bases.
Common mistakes when reading diagrams
- Missing a turn-over symbol, so every later fold lands on the wrong side.
- Folding all layers when only the top one is meant. Diagrams usually show which layer moves; if unsure, look at the next picture.
- Treating a dotted hidden line as a fold.
- Not repeating a step that was marked to be repeated behind or on another flap.
- Using paper that is too small, which makes crowded steps hard to judge.
Diagrams vs. crease patterns vs. videos
- Step-by-step diagrams show each fold in sequence and are the standard way models are published.
- Crease patterns (CPs) show only the lines of the finished, unfolded model, with no steps. They are used for complex designs and assume a lot of experience to fold.
- Videos show the hand movements in real time, which helps with collapses and tricky moves, but they can be harder to pause and compare against.
Many folders use both: a diagram for the overall sequence and a video for the hard steps. If you are just starting out, practise on a few simple models from our guide to easy origami for beginners — they use only a handful of the symbols above.