Boxes and Containers

How to Fold an Origami Star Box

Fold a traditional origami star box from one square: square base, squash folds, narrowing folds and opening the box, plus troubleshooting and paper tips.

On this page
  1. What an Origami Star Box Is
  2. What You Need
  3. Two Moves to Know First
  4. Step-by-Step Star Box
  5. Troubleshooting
  6. Variations and Uses

What an Origami Star Box Is

An origami star box is a small open dish with pointed flaps around its rim. From above, it looks like a star. The traditional version folds from a single square, with no glue or cutting. It’s popular for wrapped candy, jewelry, paper clips and party tables, and it’s a good next step once you can fold a masu box.

The star box uses two standard origami moves, the square base and the squash fold. If you know those, the rest is straightforward. The only tricky part is opening the box at the end.

What You Need

  • One square of paper. 15 cm (6 in) is the usual size for a first attempt. Larger squares, such as 20 to 25 cm, give a more usable dish and are easier to open.
  • Two-sided (duo) paper, if you have it. Different parts of the paper end up on the outside, the inside and the points, so a second color makes the star shape stand out. Single-sided paper works too.
  • Thin paper. The squash folds stack several layers, and thick paper makes them hard to flatten.

Two Moves to Know First

Square base (preliminary base). Fold a square in half diagonally both ways (valley folds), turn it over, and fold it in half edge to edge both ways. Then bring the creases together so the paper collapses into a smaller square, four layers thick, with the open corners at one end.

Squash fold. Lift a flap so it stands straight up, open the pocket inside it, and press the flap down flat so it spreads evenly to both sides of its center crease. A good squash fold is symmetrical, with the crease running down the exact middle of the flattened shape.

Step-by-Step Star Box

Pre-crease and Collapse

  1. Choose which side faces up. With duo paper, which color ends up outside depends on which side faces up when you start. Fold a practice box first and note the result so you can flip the sheet next time if needed.
  2. Pre-crease. Crease both diagonals, turn the paper over, and crease it in half both ways.
  3. Collapse into a square base. Turn the base so the open end points toward you and the closed point (the center of the sheet) is at the top.

Squash the Four Flaps

  1. Lift the front-right flap so it stands upright along its edge.
  2. Open the pocket and squash it flat so its center crease lines up with the model’s center line.
  3. Turn the model over and squash the matching flap on the back. Then squash the remaining two flaps the same way, turning layers like the pages of a book to reach them.

You now have a symmetrical shape with eight layers. It’s the same stage the frog base goes through before its petal folds.

Narrow the Flaps

  1. Turn the layers so a smooth face, without a squash seam down the middle, is facing you.
  2. Fold the lower edges of the top layer in to meet the center line, so the bottom of that face becomes a narrow point.
  3. Turn to the next smooth face and repeat. Keep going until every smooth face has been narrowed, and check the shape stays symmetrical from all sides.

Crease the Base and Open the Box

  1. Fold the top triangle (above the narrowed section) down firmly over the front, then unfold it. Do this on every side. These creases mark the edges of the box’s floor, so make them sharp.
  2. Hold the model with the narrow points facing up and the closed point facing down. Gently spread the flaps apart, working your way around.
  3. As the box opens, press the bottom (the former closed point) flat from the inside with a fingertip, so it settles into a square along the creases from step 10.
  4. Shape the rim: fold or curl the outer points outward so they splay into the star shape, and pinch the walls so they stand evenly.

The opening step is where most star boxes go wrong. Go slowly, don’t pull hard on any one flap, and let the creases from step 10 guide the floor into shape. If you’re stuck, compare your model against a diagram or video of the traditional star box at this stage. Seeing the squash and opening moves done once usually sorts it out.

Troubleshooting

  • The squash folds look lopsided. The square base wasn’t collapsed evenly. Re-crease the base sharply and make sure the flap’s crease lines up with the center before you flatten it.
  • The box won’t sit flat. The floor creases from step 10 are too soft, or the bottom wasn’t pushed fully flat. Re-crease them and press the floor from the inside on a hard surface.
  • The points are uneven. One narrowing fold missed the center line. Unfold that face and redo it.
  • The paper tears at the bottom. Too many layers meet there. Use thinner paper or a larger square.
  • It keeps closing up. Crisper creases help, as does slightly heavier paper. Some people add a dot of glue under each point once the shape looks right.

Variations and Uses

  • Different sizes as a set: Fold three star boxes from 10, 15 and 20 cm squares and nest them, or set them out on a table as candy dishes.
  • Pentagonal and other star boxes: Some designers have made versions with five or more points. These usually start from a pentagon or a different base and take more effort.
  • Pair it with a lid box: A star box doesn’t close. For a closed gift, use a masu box with a lid or a takeout-style box.
  • Desk storage: A large star box from wrapping paper makes a good paper-clip dish. For more storage ideas, see the origami boxes and containers guide.

The complete guide to boxes and containers

Origami Boxes and Containers: Fold Your Own Storage
Read the guide

Keep exploring

Guides from other topics

All topics →