Math and Science

How to Trisect an Angle with Origami (Abe's Method)

Step-by-step instructions for Hisashi Abe's origami angle trisection, with a simple proof and why folding can do what a compass and straightedge cannot.

On this page
  1. The short answer
  2. What you need
  3. Step-by-step: Abe’s trisection
  4. Why it works
  5. Angles of 90° or more
  6. Tips for an accurate result
  7. Why this is a big deal: the impossible problem
  8. Try it in class

The short answer

To trisect an angle with origami, you place the angle at a corner of a square, fold two equally spaced lines parallel to the bottom edge, and then make one special fold that moves two points onto two lines at once. Marking where those points land and folding lines through them back to the corner splits the angle into three equal parts. This method is credited to the Japanese mathematician Hisashi Abe and is usually dated to around 1980.

It’s notable because trisecting an arbitrary angle is impossible with only a compass and an unmarked straightedge, but one fold of paper can do it.

What you need

  • A square of paper. 15 cm (6 inch) origami paper is fine, but a larger square is easier to fold accurately.
  • A pencil.
  • A pin or the point of a compass (optional, for marking through layers).
  • A protractor to check your result.

The method below works directly for acute angles (less than 90°). There’s a simple adjustment for larger angles later on.

Step-by-step: Abe’s trisection

Lay the square flat and label the bottom-left corner P. Every step is described with the paper in this position.

Step 1: Mark the angle

Draw or fold a line from P making the angle you want to trisect with the bottom edge. Call this line L. The angle you’ll trisect is the one between the bottom edge and L, measured at P. If you’re testing the method, try something like 60° or 75° first so you can check the result.

Step 2: Fold two parallel guide lines

  1. Fold a horizontal crease parallel to the bottom edge, at any height you like, and unfold. Call it line A. About a quarter to a third of the way up the square works well.
  2. Fold the bottom edge up to line A and crease, then unfold. This makes line B, exactly halfway between the bottom edge and A.

Now label two points on the left edge:

  • Q, where line A meets the left edge.
  • R, where line B meets the left edge.

So P, R and Q sit on the left edge, equally spaced from bottom to top.

Step 3: Make the key fold

This is the only tricky part. Fold the paper so that, at the same time:

  • corner P lands on line B, and
  • point Q lands on line L.

Bring the bottom-left corner up and to the right, sliding and adjusting until both conditions hold. For an acute angle and a sensible choice of line A, there’s one position that works. Take your time, then crease firmly.

Step 4: Mark two points

With the paper still folded, mark two points on the sheet underneath:

  • P′, where corner P now sits on line B.
  • R′, where point R now sits. Point R is on the folded flap, where line B meets the flap’s left edge. Push a pin straight through to mark it on the layer below.

Step 5: Fold the trisecting lines

Unfold the paper. Fold or draw a straight line from P through P′, and another from P through R′.

These two lines divide the original angle into three equal parts. Check with a protractor: if the original angle was 60°, each part should be 20°.

Why it works

The proof uses only reflection and congruent triangles. The key fold is a reflection across the crease, so it keeps lengths and right angles the same. Write Q′ for the point where Q lands (on line L).

  1. The folded edge. Before folding, R is the midpoint of segment PQ on the left edge. The fold carries P to P′, R to R′ and Q to Q′, so R′ is the midpoint of the folded edge P′Q′, and P′R′ = PR = the spacing between the guide lines.
  2. A right angle at R′. The fold swaps P and P′, so it carries segment P′R onto segment PR′. Segment P′R lies along line B, which is perpendicular to the left edge PQ. Reflection keeps right angles, so the images are perpendicular too: PR′ is perpendicular to P′Q′.
  3. Two congruent triangles. PR′ meets P′Q′ at a right angle at its midpoint R′, so triangles PR′P′ and PR′Q′ are congruent (two equal legs and a shared leg). That means angle P′PR′ equals angle R′PQ′.
  4. A third congruent triangle. Drop a perpendicular from P′ to the bottom edge, meeting it at T. Since P′ is on line B, P′T equals the guide-line spacing, which equals P′R′. Triangles PTP′ and PR′P′ both have a right angle, share the hypotenuse PP′ and have one equal leg, so they’re congruent. That means angle TPP′ equals angle P′PR′.

Putting it together, the angle from the bottom edge to PP′, from PP′ to PR′ and from PR′ to L (which passes through Q′) are all equal. The two lines split the original angle into three equal parts.

Angles of 90° or more

The fold as described is set up for acute angles. For a right or obtuse angle θ, you can split the work in two:

  • A right angle is easy to trisect by folding, because 30° and 60° angles can be constructed directly (for example, using the equilateral-triangle fold from a square).
  • For an obtuse angle, write θ = 90° + φ, trisect the acute angle φ with Abe’s method, then add 30°, since θ ÷ 3 = 30° + φ ÷ 3.

Alternatively, trisect half the angle and double the result.

Tips for an accurate result

  • Use crisp, thin paper. Thick paper makes the key fold harder to judge.
  • Choose line A sensibly. If A is too high, the key fold may push P near or past the paper’s edge, which makes it hard to align.
  • Align both points before creasing. Hold the paper up to a light so you can see the creases through the layers.
  • Mark through the layers. A pin hole is more accurate than guessing where a point sits after unfolding.
  • Expect a little error. In practice, small inaccuracies in each fold add up. A result within a degree or two of the true value is a good fold.

Why this is a big deal: the impossible problem

Ancient Greek mathematicians asked whether every angle could be divided into three equal parts using only an unmarked straightedge and a compass. They found methods for some angles, but never a general one. In 1837, Pierre Wantzel proved that a general method doesn’t exist. Straightedge-and-compass constructions can only solve problems that reduce to linear and quadratic equations, and trisecting a general angle requires solving a cubic.

Paper folding gets around this limit because one fold can do something no compass step can.

The Beloch fold

Step 3, placing two points onto two lines at once, is an example of what’s called the Beloch fold, named after Margherita Piazzolla Beloch, who studied it in the 1930s. It’s the sixth of the Huzita–Hatori axioms, the list of basic single-fold operations in origami geometry. Finding that fold is equivalent to solving a cubic equation. This is why origami can trisect angles, and also why it can double a cube, constructing a length equal to the cube root of 2, which is another classical problem that compass and straightedge can’t solve.

Our guide to mathematics through origami lists all seven axioms and explains how they compare to compass constructions.

Try it in class

Abe’s trisection works well as a high school geometry lesson:

  1. Students each fold a trisection of a different acute angle and measure the result with a protractor.
  2. The class collects the errors and discusses where they come from.
  3. Students work through the four-step proof above, or find their own using congruent triangles.
  4. As an extension, they compare with the impossibility of compass trisection and research the Beloch fold.

For more folding activities with clear math outcomes, see the lesson plans in mathematics through origami, or explore the exponential math in how many times you can fold paper in half.

The complete guide to math and science

Mathematics Through Origami: Geometry You Can Fold
Read the guide

Keep exploring

Guides from other topics

All topics →