What You’ll Need
- Pieces: a few hundred standard triangular units. The exact number depends on how long and how wide you make the fish.
- Colors: white plus orange or red is the classic koi combination. Add black for more complex patterns.
- Paper: printer or colored copy paper, cut from A4 or letter into 32 rectangles each. Cutting into 16 gives a bigger fish.
- Extras: white glue for fins and tail, plus two small beads or a marker for eyes.
If you haven’t folded the triangle unit before, start with our step-by-step guide to folding a 3D origami piece.
Plan Your Koi Colors First
A koi’s look comes almost entirely from its color pattern. With modular origami, colors are fixed once you place a piece, so it pays to plan ahead.
- Sketch the fish. You don’t need drawing skills. A simple side-view outline does the job: an oval body, a rounded head at one end, and a fan-shaped tail at the other, with small fins below the body.
- Map it on graph paper. Draw each row as a line of small triangles, one per piece, and color them in. Each row of the body becomes one ring.
- Count colors. Total the pieces of each color and fold a few spares of each.
Classic Koi Patterns to Copy
Real koi varieties give you ready-made color schemes:
- Kohaku: a white body with red or orange patches. This is the simplest and most recognizable choice.
- Sanke (Taisho Sanke): white with red patches and small black spots.
- Showa: mostly black, with red and white patches.
- Single-color: all orange or all gold. This is a good first attempt that lets you focus on the shape.
Building the Body
Most 3D origami fish bodies are built as a tapered tube of rings, much like a vase lying on its side:
- Start at the head end with the first two rows built together, then close them into a small ring.
- Widen gradually. Over the next several rows, add pieces to each ring so the body swells toward its widest point, roughly a third of the way along.
- Hold the width for a few rows. Rows of the same count form the thickest part of the body.
- Narrow toward the tail. Remove pieces row by row so the body tapers to a small ring where the tail will attach.
Follow your color chart as you go. Placing a single piece wrong is easy to fix now and hard to fix later. Our 3D modular origami overview explains how adding and removing pieces shapes a ring.
Shaping the Head
The head is the first few small rings at the front. To make it look like a fish rather than a tube:
- Gently press the front rings so they slope inward toward a rounded snout.
- Some folders tuck one or two pieces into the front opening to close it. Others leave a small open “mouth.”
- Koi have small barbels (whiskers) near the mouth. Thin strips of paper or very short chains of pieces can suggest them, glued in place.
Making the Tail Fin
The tail is usually a flat, fan-like panel:
- Build a small flat panel (not a ring) with more pieces in each row as it spreads outward, so it fans open.
- Split the outer rows into two lobes for the classic forked tail shape.
- Glue the narrow end of the fan into the tail end of the body.
Keep the tail light. Too many rows make it heavy enough to tip the fish.
Adding the Side and Top Fins
- Pectoral fins (near the head, one on each side): short chains or tiny panels of two to four pieces each, glued below the front of the body.
- Dorsal fin (along the top): a low panel or a row of pieces set point-up along the back.
- Smaller fins underneath, toward the tail, are optional.
Fins in a contrasting color, or white on an orange body, help the shape read clearly.
Eyes and Finishing
- Glue on two small black beads, or draw eyes with a permanent marker.
- If the fish rolls over, make a small stand from a ring of pieces, or glue a flat disk of card underneath.
- For a pond display, two koi curving around each other in opposite colors (one orange, one white) make an attractive pair.
A Simpler Option: A Single-Sheet Origami Fish
If you want a fish in minutes rather than hours, single-sheet origami has many beginner fish designs. Most start from a basic triangle or kite shape and need only a handful of folds, with the tail made by folding a corner outward. They make good warm-ups with children and are a gentle way to get used to crisp creasing before moving to modular work.
How Hard Is a 3D Koi Compared to Other Origami?
A 3D koi is a mid-level modular project. Each piece is easy to fold. The challenges are the number of pieces, keeping the color pattern accurate and shaping a smooth taper. It’s a natural next step after a 3D origami swan or 3D origami pineapple.
For comparison, the easiest origami animals are simple single-sheet designs such as a dog or cat face, which take only a few folds. At the other end, complex single-sheet models by artists such as Satoshi Kamiya, whose Ryujin dragon is often mentioned, can take expert folders many hours or even days.